Age Verification
To use the our website you must be aged 21 years or over. Please verify your age before entering the site.
To use the our website you must be aged 21 years or over. Please verify your age before entering the site.
Press & lock tips. Available for 0.5ml and 1.0ml. Standard 510 thread. 4pcs 2.0mm intake holes. Premium quality ceramic coil. Heats up quickly and stably heating wire to prevent pop and clog
Compliance & Certificate
|
Brand |
GYL |
|
Model |
A6 |
|
Color |
Silver |
|
Tank capacity |
0.5ml / 1.0ml |
|
Coil |
Ceramic coil |
|
Hole size |
2.0mm * 4 holes |
|
Resistance |
1.4ohm |
|
OEM & ODM |
Highly welcome |
|
Size |
0.5ml: 10.5mmD*55mmH 1.0ml: 10.5mmD*65mmH |
|
Package |
1. individual in plastic tube 2. 100pcs in white box |
|
MOQ |
100PCS |
|
FOB Price |
$0.6-$0.8 |
|
Supply Ability |
10000pcs/day |
|
Payment Terms |
T/T, alibaba, western union |
Press tips can save your time to screw the tips slowly after filling and lock design to prevent children to take off the tips which lead to bad situation. Stainless steel metal material which make the cart not related to heavy metal. People are happy to buy safe and healthy products. Compatitable for 510 battery. Generally the intake hole is 2.0mm, but if your oil is something thin, we can custom the holes to be smaller like 1.6mm, 1.2mm or even 1.0mm. The heating wire is 1.4ohm generally. But if your oil is Live Rosin or Live Resin, we can make 1.7ohm which is better for you. Anyway we're a manufacturer and can do fully customized stuff for you.
1. Fill a syringe with a blunt tip needle with your desired oil. Insert the needle into the chamber between the center post and the outer tank wall.
2. Depending on the consistency of oil, heating may be necessary to match the viscosity.
3. Dispense oil into the chamber up to the lower gasket located on the center post. DO NOT OVERFILL as overfilling can cause leaking.
4. Do not fill in the center post. Filling this in will cause blockage of the air path and cause leakage.
4. Capping can be done by an assisted capping machine or by hand. When capping, do not over tighten and adjust machine accordingly.
5. For thicker viscosities, let the oil settle in the cartridge until the oil is able to reach the bottom of the tank. After, cap the cartridge to ensure that proper pressure is utilized to seal the cartridge.
6. After capping, the cartridge must be kept upright and be allowed a minimum of 2 hours for the saturation period.
